GMperformanceparts.jpg (4742 bytes) Welcome to TBICHIPS.COM
TBICHIPS.jpg (18979 bytes)

[Online Catalog]

[Custom Tuning]

[96+ OBD2 vehicles]

[ECM Service No Info]

[Good TBI MODS]

[Chip Instructions]

[WINALDL]

[Contact info]

[Frequently Asked?]

[Porting Vortec Heads]

[Customer Projects]

[My Projects]

[MAIN]

[Other Links]

I am now starting to program some of the newer OBD2 stuff which doesn't have a replaceable chip. I can do a computer CORE exchange with some of   the 96-99 Vortec motors, the 94-97 LT1 (I included the 94-95 OBD1 LT1 as they have a flash style computer like the OBD2) and the 99-02 LS1 stuff you can mail me your computer and I can reprogram it and using Fedex next business day its about $140 worth of shipping back and forth which would leave you without a car for about 3 days.  I may start doing some core exchanges with those cars as well if enough people request that.

With the OBD2 computers I can correct your speedo for gear and tire changes and eliminate computer error codes such as removal of the rear 02 sensors.  I can also gain you 10% hp and about 5% more gas mileage.

The OBD2 programming fee is $180 programming and $100 computer core charge, if I have one available.   You can also Fedex the computer with $240 and I will Fedex Overnight the computer back to you if that is an easier route or I don't have a matching CORE computer for you vehicle.   If you give me some lead time and all the numbers from your stock computer, I will locate a CORE computer to use for reprogramming.

2001+ Duramax Diesel.  I have a nice little 80hp program for those trucks which is about as hot as I recommend for daily drivers.  Cost for this program is $200 and its local programming only and with the cost of those computers will likely not move to a computer exchange program any time soon.

new.gif (945 bytes) http://www.obd2allinone.com/  check out the new dataogging tool for the OBD2 vehicles.  I have used the OBD2 cable from ALDLCABLES and it works great. I haven't found datalogging software that I like for the OBD2 yet but I haven't devoted the time to test a lot of software yet.

I am hoping to add a nice OBD2 project before too long.  I am currently in the planning stages.